PureLink HDG Pro 4K/HDCP 2.2 Signal Generator & Analyzer w/Touch Panel

Item #: PureLink-HDG-Pro
Manufacturer Part #: HDG Pro
Brand:
PureLink

No Reviews Yet | Write a review

Leaves Warehouse within 1-2 Business Days

4K/HDCP 2.2 Signal Generator & Analyzer w/Touch Panel


The HDG 2.0 is and advanced testing device for A/V signal analysis and device calibration with support for resolutions up to 4K@60Hz (4:4:4), as well as HDMI 2.0 and HDCP 2.2 compliance.


The HDTools? HDG Pro is an HDMI 2.0 Signal Generator supporting video resolutions up to 4K@60Hz 4:4:4, 18 Gbps bandwidth, and HDCP 2.2. This versatile tool allows integrators and installers to test and verify A/V signal paths with Test Pattern Generator, Signal Analyzer, HDCP Test, EDID Test, and Loop Test functions. The HDG Pro also features a 4.3? touchscreen for controlling the device and viewing the signal from the HDMI input, as well as a 4-hour rechargeable battery providing greater portability and ease of use.

Key Features:

  • 4K@60Hz 4:4:4 8 bit, 4K@60Hz 4:2:0 16 bit HDR pattern generator & signal analyzer
  • Support 18 Gbps bandwidth
  • 4.3? touchscreen panel
  • Digital audio test function
  • Supports HDMI loop through function
  • HDCP test function to verify HDCP source and transmit HDCP encrypted video
  • Supports user-defined patterns (up to 2Gb)
  • Scrambling function or videos over 340MHz
  • Video pass-through mode (analyze the signal and monitor the video at the same time)
  • Supports third-party device control via Ethernet/LAN
  • Rechargeable battery design (up to 4 hours)
  • Firmware update through USB flash drive
Technical Specifications
Compliance HDMI 2.0, HDCP 2.2/1.4
Supported Bandwidth 18 Gbps
Supported Resolutions Up to 4K@50/60Hz (4:4:4)
Color Space DVI, RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth 8-bit, 10-bit, 12-bit, 16-bit
Digital Audio Test Built-in PCM audio tone menu (test audio on display devices or A/V receivers) / set bits per sample, sample rate, level and audio channel
Connector Types
Input [1] HDMI Type A [19-pin female]
[1] Ethernet [RJ45]
[1] Firmware [USB type A female]
Output [1] HDMI Type A [19-pin female]
[1] Stereo Out [3.5mm mini-jack]
Mechanical Specifications
Power Supply 12V 5A
Operational Temperature 86?F (30?C) or below
Relative Humidity 60% or below RH (non-condensing)
Dimensions (WxDxH)
Weight

2020
Contact Us
  • 1-888-392-4814
  • (201) 353-0303
  • www.4kprojectors.com

© 2021. All rights reserved Next Projection LLC. | Proudly Made in the U.S.A.